We are having trouble with our Xrite spectro wanting to calibrate the "plaques" on the heads every 1-2 minutes. Traditionally, it will want to do this calibration first thing in the morning when the console and computer are started. Suddenly, without real reason, it has started to ask every 1-2 minutes.
This has become a burden because there is no cancel button and then scan our colorbars. When my pressman is running a job, the "plaque" calibration takes 30 seconds to complete. This causes a lag in color control on our 4 color work.
Any thoughts on why/how this has changed? We have removed the head, and cleaned the gold prongs to make sure they are not corroded or scortched. We also have cleaned the white/black plaques with cleaner to ensure there is nothing on them...
This has become a burden because there is no cancel button and then scan our colorbars. When my pressman is running a job, the "plaque" calibration takes 30 seconds to complete. This causes a lag in color control on our 4 color work.
Any thoughts on why/how this has changed? We have removed the head, and cleaned the gold prongs to make sure they are not corroded or scortched. We also have cleaned the white/black plaques with cleaner to ensure there is nothing on them...