basysPrint UVSetter upgrade 746 to 755 - YouTube
Video of converted 9 years old Basysprint UVSetter 746 to a 755 machine.
Before it was a two head lamp machine and now it's a one head machine with a uv-laser light source...
All gen4 machines possible to upgrade.
The advantages are:
1.) no lamp and lamp exchange necessary anymore! (this saves around 1500-2000€)
2.) stable output power over the whole lifetime of the laser module(s) (warranty for 5years or 8000hrs)
3.) less calibration needed
4.) less power consumption and cooling - 8W laser module instead of 1000W lamp (the laser module is only on during the exposure!)
5.) speed compared to the lamp machine is at least the same or higher (if you upgrade up to two laser modules you can double the speed)
(exposure time of a 1030x800 plate size less than 4 minutes 100% imaging!!!)
(15pph with one head more or less depend of the plate type [neg-pos] and brand [AGFA Aluva, IBF, N555, Ipagsa, Fuji)
6.) no condenser lens needed (no wear anymore)
7.) Gen5 DMD’s are cheaper (4821.25€ list price) and 3 times usable!
8.) software operation and overlay calibration works in the same way as before
There are four upgrade packages available;
• Single or dual laser upgrades for a single imaging head system. most recommend upgrade scenario
• Single or dual laser upgrades for a dual imaging head system.
What is included in the upgrade package?
Laser module(s), fiber cable, Integrator, lens block, electrical components, laser module mounting kit
What needs to be re-used?
Objective, formatter board, DMD, height sensor and field lens
(DMD and formatter needs to be checked before upgrade if it’s usable or not)
The warranty on the laser modules will also be 8.000 hrs or 5 years, whatever comes first.
On the other newly installed components, part of the upgrade package, we provide 1 year warranty.
Warranties start from the date of shipping the upgrade kit.
Video of converted 9 years old Basysprint UVSetter 746 to a 755 machine.
Before it was a two head lamp machine and now it's a one head machine with a uv-laser light source...
All gen4 machines possible to upgrade.
The advantages are:
1.) no lamp and lamp exchange necessary anymore! (this saves around 1500-2000€)
2.) stable output power over the whole lifetime of the laser module(s) (warranty for 5years or 8000hrs)
3.) less calibration needed
4.) less power consumption and cooling - 8W laser module instead of 1000W lamp (the laser module is only on during the exposure!)
5.) speed compared to the lamp machine is at least the same or higher (if you upgrade up to two laser modules you can double the speed)
(exposure time of a 1030x800 plate size less than 4 minutes 100% imaging!!!)
(15pph with one head more or less depend of the plate type [neg-pos] and brand [AGFA Aluva, IBF, N555, Ipagsa, Fuji)
6.) no condenser lens needed (no wear anymore)
7.) Gen5 DMD’s are cheaper (4821.25€ list price) and 3 times usable!
8.) software operation and overlay calibration works in the same way as before
There are four upgrade packages available;
• Single or dual laser upgrades for a single imaging head system. most recommend upgrade scenario
• Single or dual laser upgrades for a dual imaging head system.
What is included in the upgrade package?
Laser module(s), fiber cable, Integrator, lens block, electrical components, laser module mounting kit
What needs to be re-used?
Objective, formatter board, DMD, height sensor and field lens
(DMD and formatter needs to be checked before upgrade if it’s usable or not)
The warranty on the laser modules will also be 8.000 hrs or 5 years, whatever comes first.
On the other newly installed components, part of the upgrade package, we provide 1 year warranty.
Warranties start from the date of shipping the upgrade kit.